Make: Tokyo Meeting 06

This is an old news. BeatCraft attended Make: Tokyo Meeting 06.On November 20th and 21st, MTM:06 was held at the Tokyo Institute of Technology. BeatCraft demonstrated a bc10 and the AMI 602 Arduino shield. We also sold AMI 602 Arduino shield kit at the booth. Our booth was located at a good place: it was directly behind a full-scale model of Hyabusa, a famous Japanese space probe. A lot of people visited our booth and asked interesting questions.We had grate time there.
Thank you.



In the demo, bc10, which was running android 2.2_1.1 and connected to an USB camera. We also displayed two expansion boards. (This type of expansion board is sold as an option.) This expansion board is equipped with universal pattern. You may add sensors and connectors to bc10 via this board. One board is put on a barometer module, and the other is hosted the thermometer modules. The technical information of these boards are published at BC::labs. Please visit this page for the details of these expansion boards.
We also exhibited the AMI 602 Arduino shield and sold the kit of this shield. These were the same as we had done at Make: Ogaki Meeting. This shield employs AMI602, a 6-axis motion sensor developed by AMI. The technical information of this shield kit is available at this page of BC::labs.

There are some pictures of the event. The pictures have been taken and selected arbitrarily.